Click image to view full size image
Â
Disposable vat, bottle rinsing part: This machine is a rotary bottle rinsing machine, mainly used for rinsing beverage, water and other product bottles. Bottles enter the equipment via pulleys by clamps and The turning mechanism clamps the bottle mouth and turns it to the bottle mouth facing down. After rinsing with sterile water, it is drained and automatically flipped to the bottle mouth facing up and transported to the filling machine.
Â
Â
Â
1)The filling machine can make the filling speed fast on the premise of meeting the liquid level required for water filling.
2) The bottle lifting mechanism and other parts adopt German igus corrosion-resistant and maintenance-free bearings, which do not require lubrication and do not pollute the bottles, materials inside the bottles, and the filling environment.
3) The filling valve is made of SUS304 and is connected to dynamic and static seals through stainless steel sanitary pipes. The lifting mechanism realizes rising and falling under the action of cam, and the filling process starts after the bottle mouth contacts the filling valve.
4) The power of the filling machine is transmitted through the gears through the transmission system in the frame. The support bearing is a large plane toothed ball bearing, which operates smoothly and reliably. The bearing is equipped with multiple reliable waterproof structures such as sealing rings and waterproof rings, which can effectively prevent water on the table from penetrating into the bearing.
Â
Â
The capping machine is the most accurate single machine among the three-in-one machines, and has a profound impact on the reliability of equipment operation and the defective rate of products. The characteristics of the capping machine produced by our company are as follows:
1) The capping machine is equipped with a bottle incoming detection switch, which interlocks with the cap locking cylinder at the connection between the cap drop guide rail and the cap dial to control the discharge of bottle caps, ensuring that cap feeding stops when there are no bottles and reducing the loss of caps for users.
2) A set of photoelectric switches is installed on the cap-drop guide rail. When there is no cap on the cap-drop guide rail, it will automatically stop the machine and alarm, which can effectively eliminate the need for bottles without caps. 's appearance.
3) 3) The anti-rotation knife is made of materials, which makes the effect and life long.
Â
http://www.liquid-packaging-machinery.com/